LG Dishwasher – Error Codes

No Comments Other

1E: Inlet error. Normal water level not reached in 10 minutes. Possible Causes

  • Water tap is shut. Cure Open the tap.
  • Inlet hose is kinked. Cure repair the inlet hose.
  • Filter on the inlet valve is blocked. Cure clean/replace the filter.

 

  1. Water pressure is low.
  • Check water pressure.

 

  1. Inlet valve blocked
  • Replace inlet valve.

 

OE: Drain error (Not fully drained after 5 minutes). possible causes

  • Filter blocked. Check and clean filter.
  • Drain hose kinked or blocked. Check and clear.
  • Drain pump blocked or failed,unblock or replace

 

E1: Leakage error Water level in tub decreases during wash

  • Leaking from hoses check and replace where nessersary
  • Leaking from tub or associated components. Check and replace part where nessersary

 

FE Over fill error .Over fill issue. (Drain pump operates automatically).

  • Inlet valve is broken. Check and replace where nessersary
  • Air brake is faulty. Check and replace where nessersary
  • Sensor assembly is faulty. Check and replace where nessersary

 

  1. Controller is faulty
  • check and replace where nessersary

 

TE: Thermal error thermistor out of calibration

  • Wiring to the Thermistor is damaged. Check and replace where nessersary
  • Thermistor is out of calibration. Check and replace where nessersary
  • Controller is faulty. Check and replace where nessersary

 

HE: Heater error. Water has not heated or overheated in the tub.

  • Wiring to the heater is damaged. Check and replace where nessersary
  • Thermistor is faulty. Check and replace where nessersary
  • Heater is shorted or open circuit .Check and replace where nessersary
  • The relay circuit is faulty. Check and replace where nessersary

 

To book an experienced  LG washing machine engineer call 0203 8927620 or 07706 937561